The Meshlium Cloud Connector for the Telit deviceWISE IoT Cloud platform is provided to connect Libelium Waspmote sensor devices to the Telit Cloud Platform.
The basic steps required to connect Waspmote sensors to the cloud platform are simple and straight forward:
a) Using the Telit Management Portal at portal.telit.com:
b) Using the Meshlium Manager System web browser interface:
Once your Telit IoT Cloud account has been configured with the new 'Thing Definitions' and 'Application' in support of the Meshlium Cloud Connector, you are ready to proceed with configuring your Meshlium gateway.
Select the 'Telit deviceWISE Cloud Connector' service icon located on the Cloud Connector -> Basic Cloud Partner panel. Configure the fields to provide the required configuration and control information on the 'Telit deviceWISE Cloud Connector' management panel as shown below.
Where:
Once all settings are provided, save the configuration settings by pressing the Save button.
In the event that a field has been left blank or a string has been entered into a numeric data field, the field entry frame will be highlighted and an error message will be displayed as shown in the screen images below.
At this point the Meshlium Cloud Connector is configured and ready to start.
Once the Telit deviceWISE IoT Cloud Connector has been configured with the proper runtime parameters, it is ready for operation. To initiate the connection from the Meshlium gateway to the Telit IoT Cloud Platform and start the background service awaiting data frames from Waspmote sensor device nodes, press the Start button. To initiate the connection from the Meshlium gateway to the Telit IoT Cloud Platform and start the background service awaiting data frames from Waspmote sensor device nodes, press the Start button.
To stop the background service from awaiting data frames from Waspmote sensor device nodes and terminate the connection from the Meshlium gateway to the Telit IoT Cloud Platform, press the Stop button.